Opens in a new tab
Kammerer Gewinde glossary

Felt wiper

A felt wiper is a simple wiper made of felt that is located on the ball nut and keeps the screw shaft surface free of dust and fine particles. When soaked with oil, it also serves as a lubricant reservoir.

How is a felt wiper constructed?

A ring or insert made of felt is fastened in a holder on the end face of the nut and rests directly against the screw shaft. During travel, it wipes off loose dirt and keeps it away from the thread turn. If the felt is lightly soaked with oil, it continuously wets the screw shaft and supports lubrication.

What are the advantages and disadvantages of a felt wiper?

Simple, low-cost design

Not suitable where chips are present

Good effectiveness against dust and fine particles

Not suitable where there is a lot of liquid or coolant

Very low frictional resistance

Felt absorbs liquid and dirt and must be replaced

Additional lubricating effect

No sealing protection against coarse contamination

Where are felt wipers used?

  • Applications with low contamination, such as measuring instruments and small automatic machines
  • Machines in dry or dusty environments
  • Axes where a low-cost, low-maintenance solution is sufficient

Practical Tips

Where chips or coolant are present, plastic wipers or double wipers are the better choice. An overview of all designs can be found on the wiper and sealing system pages.