Opens in a new tab
Kammerer Gewinde glossary

Coaxiality

Coaxiality is a position tolerance according to DIN EN ISO 1101. It specifies how far the axis of a cylindrical element may deviate from a datum axis. The tolerance zone is a cylinder with the diameter t whose axis coincides with the datum axis.

Drawing specification

Coaxiality is indicated by the symbol ◎, followed by the tolerance value and the datum, for example “◎Ø0,01A−B◎ Ø0,01 A-B“. This means: the axis of the toleranced cylinder must lie within a cylinder with a diameter of 0.01 mm around the common axis of datums A and B.

Coaxiality, concentricity, and radial runout

Coaxiality

Axes over a length

Only the position of the axis

Concentricity

Center points in a cross-section

Only the position of the center point

Radial runout

Surface during rotation

Position and form together

Significance in screw drives

On a screw shaft, the bearing seats on the screw shaft journal must be coaxial with the thread axis. Deviations lead to:

  • Wobbling of the screw shaft and fluctuating torque
  • Additional radial forces on the nut and bearings
  • Vibration, noise, and premature wear

The nut, nut housing, and bearing blocks must also be aligned coaxially with the screw shaft.

Measurement

Coaxiality is determined on coordinate measuring machines or form measuring instruments. In the workshop, radial runout between centers is often checked as a substitute, which captures coaxiality errors and form errors together.